Arduino Robotics Kits for Beginners and Advanced Makers
Full Arduino Robotics Kits
LittleArm Big Advanced Arduino Robot Arm - Full Robotics Kit
$219.00
Sold out
The LittleArm Big is a 6 axis arduino robot arm kit for higher level education. Simple to control and train with either the bluetooth application or windows software the LittleArm Big is a robotics kit that shows the full capabilities of robotics as they exist in industrial settings today.
Tech Specs:
Reach: ~12 inches
Max Payload (fully extended): 0.25 LB
Processor: Atmega 328P (Arduino Nano)
Power: 6V 3A
Fully 3D Printed
More info on the LittleArm Big Here
All the code for the LittleArm Big is entirely open source and can be edited with an Arduino IDE.
The colors may vary from those shown in the photographs.
Littlebot Budget Basic Programming Robot Kit
$45.00
With the LittleBot Budget we wanted to make it as easy as possible for kids to get started with robots. So we boiled a robot down to its very essence. A way to move, a way to think, and a way to see. Once those are in place you have a robot that you can do a surprisingly large amount with. And it is affordable enough that any classroom, group, or individual and get and build a whole mess of the them, really opening up robotics to anyone who is interested.
- Assembly Required.
- Includes parts to Assemble a LittleBot Budget including main body piece, arduino board, battery pack and ultrasonic sensor.
- Requires 4 AA Batteries (not included).
- Requires use of the Arduino IDE.
- Colors will vary.
Learn More on the Littlebot Budget Main Page
Buddy 3D Printed Arduino Robotics Kit
$69.00
Buddy is a DIY arduino robotics kit. Based on the Arduino Nano you can build Buddy and then download and edit his primary arduino code to learn how he works and make him work better.
This kit does require assembly and knowledge of the Arduino IDE.
Included in Kit
- Arduino Nano
- Littlebots Mainboard
- Servos
- Ultrasonic Sensor
- All 3D Printed Parts (colors will vary)
- Arduino Code for the kit.
LittleArm V3 Arduino Robot Arm Kit
$99.00
The V3 is the third version of the LittleArm that we have made. It has fewer parts and relies more on 3D Printing than any of our previous kits have.
Only 21 Parts (counting screws)
The LittleArm has the fewest number of parts of any other robot arm kit. to put it together it is basically just snap-and-go the screws just make sure it doesn't fly apart.
Operates in all Orientations
We have upgraded the servos. They are the strongest metal geared micro-servos in we could find. And they more durable than any others also.
No other desktop robot arm can work in any orientation. Mount it where ever you want. And thanks to our new and improved servos performance doesn't take a hit at all.
Build in under 20 minutes
The LittleArm V3 2C has 21 parts, including the 6 screws. You just need fingers and one common screwdriver to put it together. Most of the servos snap into place without screws. The only thing you have to do is put the screws in the horns. This makes it great for classrooms where teachers are spread thin, so kids can operate independently, and later the kits can be disassembled for another group.
Included in this Kit
- All 3D printed parts
- 4 micro-servos
- The LittleArm Circuit Board
- Arduino Nano
- Bluetooth Module
- Power Supply
- USB Cable
- All necessary fasteners and hardware
- The apps are free so you get a link to download
Note: This kit does require familiarity with the Arduino IDE to build and operate.
Colors May Vary From Photos
Assembled Robots
3D Printing/Maker Robotics Kits
3D Printing Files
LittleArm Big Large Advanced Robot Arm 3D Printing Files
$20.00
The LittleArm Big is 3D Printed 6-axis arduino robot arm. This File package includes all the parts of the LittleArm Big that must be 3D printed. (All files designed to be sliced with Cura.)
Print Settings
- PLA
- 0.3mm layer height
- 15% infill
- 35mm/s
LittleArm Big Assembly Tutorials
LittleBots Gripper 3D Printing Files
$1.99
This 3D printed robot gripper is used for the LittleBot and the LittleArm Big. But it is also ideal as an addition to to any robot project where you would like to have a gripper.
This includes the 3D Printing files for:
- Actuated Finger
- Un-actuated Finger
- Palm
You will need to purchase a servo for this gripper. We recommend you use the MG90S servos from the LittleBots Store to ensure all dimensions are correct and the servo fits.
Note: These files were designed to be sliced in CURA.
LittleBot Arduino Robot 3D Printing Files
$0.99
The 3D printing files for the Littlebot/Walter 3D Printed Mobile arduino robot. We hope he will be a useful project for makers and classrooms around the world.
Printer Settings
- 0.3mm layer height
- PLA
- Print the Head Upside Down
Includes
- Head
- Base
- Wheels
- Swivel
Parts You May Need
Critter 3D Printing Files
$15.00
These are all of the 3D printing files for the Critter Arduino Walking Robot Kit. Parts were designed to be sliced with CURA. Parts compatible with the files can be purchased from the LittleBots Store.
Print Settings
- .03mm Layer Height
- PLA
- Supported
Other Parts you may Need
Walker Biped Arduino Robot 3D Printing Files
$20.00
The 3D Printing files for all of the parts of the Walker arduino biped robot. The Walker is a kit for building an simple walking arduino robot. The kit can be assembled in under an hour. Printing of the parts should require less than 12 hours of print time.
You can find the control board and Servos in our Parts Store.
Includes
- Head Cover/Helmet
- Body
- Legs
- Left Foot
- Right Foot
Print Settings
- 15% infill
- PLA
- Support on Legs and helmet
- No raft or brim unless necessary
- 0.2-0.3mm layer height
Walker is compatible with OttoDIY Software.
You may find more resources on our Tutorials Page as they become available
Arduino Robotics Parts
LittleArm MG90S Arduino High-Strength Metal Geared Servos
$5.99
These high-strength MG90S Arduino microservos are great for all kinds of robotics projects.
The Littlearm MG90S servos are full metal-geared micro-servos with great performance.
Technical Details
- Size : 22.8 x 12.2 x 28.5 mm
- Voltage : 4.8V to 6V DC
- Weight: 13.4 grams
- Speed : 0.1 sec/60degrees (at 4.8V), 0.08 sec/60 degrees (at 6.0V)
- Stall Torque : At 4.8V: 2.1 kg-cm / 25 oz-in. At 6.0V: 2.4 kg-cm / 30.5 oz-in
Arduino HC-06 Bluetooth Module
$7.99
Add bluetooth to your robot. Use the HC-06 arduino bluetooth module to upgrade your Littlearm or use it to control other arduino or robotics projects.
Every Littlearm Kit is compatible with an Android Application. In order for this to work each LittleArm needs a bluetooth module.
Every Littlearm Kit is compatible with an Android Application. In order for this to work each LittleArm needs a bluetooth module.
Arduino Nano ATmega328P for LittleArm w/USB Cord
$7.99
The Arduino Nano we use in all of our robotics kits. The Arduino Nano is an excellent and affordable version of the open-source microcontrollers. USB Cord Included
Arduino Ultrasonic Sensor HC-SR04
$3.99
Standard Arduino Ultrasonic Proximity sensor for use with the Littlebots or LittleArm arduino robot kits
6V 3A Arduino Power Supply
$9.99
This 6V 3A US plugis the power supply used to power the arduino and motors of all the LittleBots and LittleArms. It can be used to power a standard Arduino and, with appropriate wiring, several servos or motors.
LittleArm Arduino Robotics Board
$14.99
The Meped Arduino Robotics Board was designed by our friends at SpierceTech. It is an excellent arduino servo control board for any arduino robotics project.
- 9 Servo Outputs
- Bluetooth Input
- Ultrasonic Sensor Input
- Digitial IR Input (For sensors or IR remote)
- Main Power Switch
- 6V Power Input to power the board and servos
- ESP 8266 WiFi Port
The Arduino robotics board is ideal for connection to multiple sensors to control a servo-based robot.
LittleBots Gripper 3D Printing Files
$1.99
This 3D printed robot gripper is used for the LittleBot and the LittleArm Big. But it is also ideal as an addition to to any robot project where you would like to have a gripper.
This includes the 3D Printing files for:
- Actuated Finger
- Un-actuated Finger
- Palm
You will need to purchase a servo for this gripper. We recommend you use the MG90S servos from the LittleBots Store to ensure all dimensions are correct and the servo fits.
Note: These files were designed to be sliced in CURA.
Gotech 9025 9G Arduino Servo
$9.99
Sold out
These metal geared arduino servos are very powerful and precise. Good quality construction keeps the gears tight and will not allow any jitter in the operation of these servos. And the small profile makes them useful for all of your robotics projects. These servos are used in the current versions of the Littlebot Buddy, LittleArm Big, and Littlearm V3
- Item: GS-9025MG
- Size(mm): 23*12.1*28.8
- Torque: 2.5 kg/ 0.10sec @ 6V
- Weight: 13g
- Speed: 0.12-0.10 sec/ 60°
Education
Educational institutions and STEM organizations may contact us directly at slantconcepts@gmail.com to order larger quantities of the arms with educational discounts up to 25%
Educational institutions and STEM organizations may contact us directly at slantconcepts@gmail.com to order larger quantities of the arms with educational discounts up to 25%