An Advanced Arduino Robot Arm
LittleArm Big Large Advanced Robot Arm 3D Printing Files
The LittleArm Big is 3D Printed 6-axis arduino robot arm. This File package includes all the parts of the LittleArm Big that must be 3D printed. (All files designed to be sliced with Cura.)
Print Settings
- PLA
- 0.3mm layer height
- 15% infill
- 35mm/s
LittleArm Big Assembly Tutorials
LittleArm Big Advanced Arduino Robot Arm - Full Robotics Kit
Sold out
The LittleArm Big is a 6 axis arduino robot arm kit for higher level education. Simple to control and train with either the bluetooth application or windows software the LittleArm Big is a robotics kit that shows the full capabilities of robotics as they exist in industrial settings today.
Tech Specs:
Reach: ~12 inches
Max Payload (fully extended): 0.25 LB
Processor: Atmega 328P (Arduino Nano)
Power: 6V 3A
Fully 3D Printed
More info on the LittleArm Big Here
All the code for the LittleArm Big is entirely open source and can be edited with an Arduino IDE.
The colors may vary from those shown in the photographs.
LittleBots Gripper 3D Printing Files
This 3D printed robot gripper is used for the LittleBot and the LittleArm Big. But it is also ideal as an addition to to any robot project where you would like to have a gripper.
This includes the 3D Printing files for:
- Actuated Finger
- Un-actuated Finger
- Palm
You will need to purchase a servo for this gripper. We recommend you use the MG90S servos from the LittleBots Store to ensure all dimensions are correct and the servo fits.
Note: These files were designed to be sliced in CURA.
370% Funded on Kickstarter
But the BIG also has great potential in practical applications as an assistant at a workbench or even in the home. Using the simple interface you can train the arm to perform some action and set it to do it at specific times and when you ask.
Arduino and Windows Software
|
|